DM6266 Digital Clamp Multimeter Manual Ranging With 50mm Clamp Jaw

DM6266 Digital Clamp Multimeter Manual Ranging With 50mm Clamp Jaw

266 Digital Clamp Multimeter 6266 Manual Range Multimeter AC Clamp Meter LCD display with 50mm clamp jaw

Ⅰ. INTRODUCTION

The digital clamp meter of DM6266 is 3 1/2 digit LCD and standard 9V battery operation for measuring DC voltage, AC and DC current, resistance and continuity test. All overload protection is provided. It is matching with 500V insulation test attachment for insulation test function. The knob switch design makes manual operation workable & function selector, range selector and power switch are all on one knob. It is a good tool for electric measurement.

Ⅱ. GENERAL SPECIFICATION

• Display : 3 1/2 digit LCD and max. 1999 counts.
• Polarity : Auto
• Over range indication: Only the MSD "1" display.
• Sampling rate: 3 times per second.
• Low voltage indication: "LOBAT" sign
• Hold: Data hold
• Power: 9V carbon-zinc battery or alkaline battery
• Battery life: approx. 200 hours (alkaline battery)

approx. 150 hours (carbon-zinc battery)

9. Working environment: 0~50℃, ＜80% RH.

• Storage environment: -20℃~60℃, ＜80% RH.
• Dimension: 230(L)mm x 70(W) mm x 37(D)mm
• Weight: approx. 310g (including battery).
• Max. jaw opening: 50mm

  Basic Function	Range		Accuracy
  DC Voltage	1000V		±(0.8%+2)
  AC Voltage	750V		±(1.2%+4)
  AC Current	200A/1000A		±(3.0%+5)
  Resistance	200Ω/20kΩ		±(1.0%+1)
  Special Function		DM6266
  Continuity buzzer		√
  Low battery indication		√
  Data Hold		√
  Input impedance		10MΩ
  Sampling rate		3 times/s
  AC Frequency response		(40-400)Hz
  Operation way		Manual Range
  Max. Display		1999
  Clamp Size		50mm
  Battery		9V(6F22)

General Characters