
Add to Cart
Multiple Waveforms 60MHz Signal Function Generator DC Level
VICTOR 2060H 60MHz Frequency Counter Function Signal Generator Sine Square pulse triangular wave CMOS wave DC level
Instrument introduction
VICTOR series function generator can generate multiple waveforms such as sine wave, square wave, triangle wave, pulse wave, and arbitrary wave. The frequency range up to 60MHz, with duty cycle adjustment, sweep frequency, frequency signal frequency and counter function, and the output signal, amplitude, and frequency can be displayed simultaneously. The series signal generator has excellent amplitude and frequency characteristics, the appearance of this instrument is exquisite and beautiful.
This instrument is widely used in factories, schools, research institutes and laboratories.
The model description
This series of instruments are divided into three models, the main difference is the maximum frequency of sine wave output, as described below:
Model | Sine wave output maximum frequency |
VICTOR2060H | 60MHz |
VICTOR2040H | 40MHz |
VICTOR2015H | 15MHz |
Check accessories
The contents of accessories are as follows. If the contents do not match or the instrument is damaged, contact the dealer or the company.
Host: VICTOR Series Dual Channel Signal Generator | 1pcs |
Accessories: Power Adapter | 1pcs |
USB cable | 1pcs |
Signal connection cable | 2pcs |
User manual | 1pcs |
CD | 1pcs |
Technical Data
Frequency characteristics | |||
VICTOR2015H | VICTOR2040H | VICTOR2060H | |
Sine wave frequency range | 0~15MHz | 0~40MHz | 0~60MHz |
Square wave frequency range | 0~15MHz | 0-15MHz | 0-15MHz |
Triangle wave frequency range | |||
Pulse wave frequency range | 0~6MHz | 0~6MHz | 0~6MHz |
TTL digital wave frequency range | |||
Arbitrary frequency range | |||
Pulse width adjustment range | 100nS~4000S | 40nS~4000S | 25nS~4000S |
Square wave rise time | ≤25ns | ≤10ns | ≤10ns |
Minimum frequency resolution | 0.01uHz(0.00000001Hz) | ||
Frequency accuracy | ±20ppm | ||
Frequency stability | ±1ppm/3hours ±1ppm/3 hours |
Waveform characteristics | |||||
Waveform type | Sine,Square,pulse (adjustable duty cycle, precise adjustment of pulse width and period), triangular wave, partial sine wave, CMOS wave, DC level (set DC amplitude by adjusting offset), half wave, full Wave, positive staircase wave, anti-ladder wave, noise wave, exponential rise, exponential drop, multisonic wave, Symplectic pulse and Lorenz pulse and 60 arbitrary waveforms | ||||
Wave length | 2048 points | ||||
Waveform sampling rate | 266MSa/s | ||||
Waveform vertical resolution | 14-bits | ||||
Sine wave | Harmonic Suppression | ≥45dBc(<1MHz); ≥40dBc(1MHz~20MHz) | |||
Total harmonic distortion | <0.8%(20Hz~20kHz,0dBm) | ||||
Square wave and pulse wave | Overshoot | ≤5% | |||
Pulse wave | Duty cycle adjustment range | 0.1%~99.9% | |||
Partial sine wave | Duty cycle adjustment range | 0.1%~99.9% | |||
Sawtooth wave | Linearity | ≥98%(0.01Hz~10kHz) | |||
Output characteristics | |||||
Sine wave amplitude range | Frequency ≤ 10MHz | 10MHz ≤ Frequency ≤ 30MHz | 30MHz ≤ Frequency | ||
2mVpp~20Vpp | 2mVpp~10Vpp | 2mVpp~5Vpp | |||
Square wave , Triangle wave amplitude range | Frequency ≤ 10MHz | 10MHz ≤Frequency ≤25MHz | |||
2mVpp~20Vpp | 2mVpp~5Vpp | ||||
Amplitude resolution | 1mV | ||||
Amplitude stability | ±0.5%/5 hours | ||||
Flatness of amplitude | ±5%(<10MHz); ±10%(>10MHz) | ||||
Waveform output | |||||
Output impedance | 50Ω±10% (typical) | ||||
Protection | All signal outputs can work within 60 when the load is short-circuited. |