VICTOR 2GE Automotive Brake Fluid Tester
Feature
1. Install one 9V(6F22) battery at the back of tester.
2. After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding,
indicates the product self-test is successful.
3. Press SELECT button, it will locate DOT3 model automatically.
4. Each time you push the SELECT button, it will recycle from DOT3 to DOT4 to DOT5.1 with the indicator LEDs.
5. Immerse the probe into brake fluid, the different colored LED lights mean as below:
Green Light: indicates the brake fluid water content is below 1%
The First Yellow Light: indicates the brake fluid water content is approximately 1.5%
The Second Yellow Light: indicates the brake fluid water content is approximately 2.5%
The First Red Light: indicates the brake fluid water content is approximately 3%
The Second Red Light: indicates the brake fluid water content is more than 4%
6. Press POWER button to turn off the tester.
Note:
1. After use, please clean the probe and avoid any retention of stains that might affect the test.
2. If in use for a long time, best to remove all batteries and store in a dry place at normal room temperature
| 2GE |
2GF |
| water content LED indicator detect |
water content LCD detect |
| sound, light dual alarm function |
sound, light dual alarm function |
| Brake fluid type to select (DOT3/DOT4/DOT5.1) |
