VICTOR 1100S and 1050S is a super-economical type digital storage oscilloscope.The 2-channel oscilloscope has 100MHz or 50MHz bandwidth.Ultra-thin body, designed with 7-inch high resolution LCD.Support for SCPI, and for LabVIEW.

Application for electronic circuit debugging, circuit testing, design and manufacture, education and training, automobile maintenance and testing.

Features:

2 Channels and 100MHz bandwidths.

1GSa/s Real Time sample rate.

Large (7.0-inch) TFT color screen, resolution (800x480).

Record length up to 10KHz.

30 automatic measurement values, one button display.

With 16 waveform parameter measurements, manual, tracking, and automatic cursor measurement.

Plug and play USB, can be connected with computer communication, system software upgrade with U disk.

Support the stored waveform and the current waveform to display simultaneously.

Ultra-thin body, portable.

Technical Data

Model	VICTOR 1050S	VICTOR 1100S
Bandwidth	50 MHz	100 MHz
Sample Rate	100 MS/s	500 MS/s
Horizontal Scale (s/div)	5ns/div - 1000s/div, step by 1 - 2 - 5
Rise Time (at input, typical)	≤17.5ns
Channel	2
Display	7" color LCD, 800 x 480 pixels
Input Impedance	1MΩ ± 2%, in parallel with 20pF±5pF
Channel Isolation	50Hz : 100 : 1, 10MHz : 40 : 1
Max Input Voltage	400V (PK - PK) (DC+AC, PK - PK)
DC Gain Accuracy	±3%
Record Length	10K
DC Accuracy (average)	Average≥16: ±(3% reading + 0.05 div) for triangle V
Probe Attenuation Factor	1X, 10X, 100X, 1000X
LF Respond (AC, -3dB)	≥10Hz (at input, AC coupling, -3dB)
Sample Rate / Relay Time Accuracy	±100ppm
Interpolation	sin (x) / x
Interval (triangle T) Accuracy	Single : ±(1 interval time + 100ppm x reading + 0.6ns)
(full bandwidth)	Average>16 : ±(1 interval time + 100ppm x reading + 0.4ns)
Input Coupling	DC, AC , and GND
Vertical Resolution (A/D)	8 bits (2 channels simultaneously)
Vertical Sensitivity	5mV/div - 5V/div (at input)
Trigger Type	Edge, Video
Trigger Mode	Auto, Normal, and Single
Trigger Level	±5 divisions from screen center
Line / Field Frequency (video)	NTSC, PAL and SECAM standard
Cursor Measurement	triangle V, and triangle T between cursors
Automatic Measurement	Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot,Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A-B , Delay A-B, area,cycle area
Waveform Math	+, -, x, /, invert, FFT
Waveform Storage	16 waveforms
Lissajous (Bandwidth)	Full bandwidth
Figure (Phase Difference )	±3 degrees
Communication Interface	USB host, USB device
Frequency Counter	available
Power Supply	100V - 240V AC, 50/60Hz, CAT II
Power Consumption	<15W
Fuse	2A
Temperature	Working temperature: 0 ℃ - 40 ℃
	Storage temperature: -20 ℃ - 60 ℃
Relative Humidity	≤ 90%RH
Dimension	301 mm× 152 mm×70 mm (LHW)
Weight	About 1.1 kg