XI'AN BEICHENG ELECTRONICS CO.,LTD
The Best Quality, The Best Service!
Add to Cart
VICTOR 304B Infrared Thermometer-50℃~680℃ Laser Positioning Temperature Meter VA Color LCD Light Alarm Non-Contact Termometro
1. Measuring Emissivity of Material by Direct Measurement
Use a contact thermometer to measure the real temperature of the material, then use an infrared thermometer to measure, adjust the emissivity of the meter until the measured temperature is equal to the real temperature, the emissivity at this moment is the emissivity of the material.
2. Materials with much lower emissivity cannot be measured by direct measurement
Stick black tape on the surface of the material, or spray the black paint to the surface of the material,(the emissivity of the black tape and black paintε≈0.95) when the temperature of the black tape and black paint is equal to the temperature of the material, use the infrared thermometer (preset emissivity is 0.95, 0.1~1.00 adjustable) to measure the temperature of the cover on the material, adjust the emissivity value of the instrument, until the measured temperature equals to the real temperature, at this moment the emissivity is the emissivity of this material.
3. Impassivity table (Reference only)
Can adjust the parameters of the meter to achieve higher accuracy in measuring according to different material surfaces.
| Material | Emissivity | Material | Emissivity |
| Aluminum | 0.30 | iron | 0.70 |
| Asbestos | 0.95 | lead | 0.50 |
| Bitumen | 0.95 | limestone | 0.98 |
| Basalt | 0.70 | oil | 0.94 |
| Bbrass _ | 0.50 | paint | 0.93 |
| Brick | 0.90 | paper | 0.95 |
| Carbon | 0.85 | plastic | 0.95 |
| Ceramic | 0.95 | rubber | 0.95 |
| Concrete | 0.95 | dinas | 0.90 |
| Copper | 0.95 | skin | 0.98 |
| Oil sludge | 0.94 | snow | 0.90 |
| Frozen food | 0.90 | steel | 0.80 |
| Hot food | 0.93 | textiles | 0.94 |
| Glass(plate) | 0.85 | water | 0.93 |
| Ice | 0.98 | wood | 0.94 |
4. Technidal Data
| Special Function | VICTOR 304B |
| Adjustable emissivity | √ |
| Laser 9-point positioning | √ |
| Backlight display | √ |
| Low voltage warning | √ |
| High and low temperature alarm | √ |
| Unit conversion | √ |
| Auto Off | √ |
| Data hold | √ |
| Model | VICTOR 304A | VICTOR 304B | VICTOR 304C |
| Measuring range | -50~480℃ -58~896℉ | -50~ 680℃ -58 ~1256℉ | -50 ~880℃ -58 ~1616℉ |
| ℃/℉ conversion | √ | √ | √ |
| Backlight display | √ | √ | √ |
| Auto Off | √ | √ | √ |
| Measurement accuracy | (1.5%+ 1℃) (1.5%+5℉) | ||
| Repeatability accuracy | +0.5% or ±1℃(2℉) | ||
| Display resolution | 0.1℃( 0.1℉) | ||
| Response time and wavelength | Less than 500ms 8~ 14um . | ||
| Emissivity | 0.1-1.00 adjustable (step size 0.01) | ||
| Measuring material distance ratio | 12:1 | ||
| Laser aiming | Less than 1mW 650 nm Laser Class II | ||
| Screen display mode | VA color screen | ||
| Overrange hint | Low "LO" or high "H" | ||
| Storage temperature | -20℃~ 60℃ | ||
| Working environment temperature/humidity | No condensation of 10-95% RH | ||
| Power supply | 2x1.5V AAA | ||
| Size | 155*92*42mm | ||
| Weight | Approx. 180g | ||
